Harrod Vintage Wire Arch Natural Rust

Designed And Hand made By Us In The Uk, The Vintage Wire Arches Are A Real Hallmark Of Our Uk Manufacturing Excellence, Constructed Using High Strength 12mm Thick Solid Steel For The Uprights And Curved Rails And 10mm Diameter For The Cross Linked Horizontals. each Arch Is Made Up From 4 Fully Welded Sections Connected Using Precision Turned Solid Steel Joiners Which Lock The Sections In Place With Stainless Steel Screws. Available In 3 Sizes 1.2m3ft 11 Wide X 2.21m7ft 3 High, 1.5m4ft 11 Wide X 2.36m7ft 9 High And 2.0m6ft 7 Wide X 2.61m8ft 7 High All Measure 0.5m1ft 8 Deep. the Vintage Garden Arch In Natural Finish Is Supplied In Degreased Plain Steel Which Quickly Develops An Even Rust Coating. The Arch Carries A Reassuring 10 Year Guarantee, This Ensures Years Of Life Without The Worry Of Structural Failure Caused By Corrosion, Which Is Unfortunately So Often The Case With Inferior Thin Walled Tubular Products.the Arches Feature Integral Fixing Plates Which Can Be Secured Onto Decking, Sleepers, Concrete Or Paving Using Appropriate Fixings Available From All Good Hardware Stores. If You Are Planning To Fit The Arch Onto Soil Then We Recommend Securing The Arches With The Substantial Galvanised Floor Fixing Pins Which Are Available Separately select Arc 302 Above. These Are Supplied As A 4 Pack For Each Arch And Secure Through The Integral Fixing Plates And Into The Ground By 40cm16. For Ultimate Rigidity, Set The Fixing Plates And Pins In Concrete With The Base Of The Arch Approx. 50mm Below The Surface.designed Manufactured In The Uk By Us!solid Steel Rod Framework 12mm For Uprights And Curved Rails 10mm For Linking Horizontal Barsdegreased Steel Rods Quickly Develop An Even Rust Coatingavailable In 3 Sizessmall Arch Measures 1.2m3ft 11 Wide X 2.21m7ft 3 High X 0.5m1ft 8 Deepmedium Arch Measures 1.5m4ft 11 Wide X 2.36m7ft 9 High X 0.5m1ft 8 Deeplarge Arch Measures 2.0m6ft 7 Wide X 2.61m